Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C Size:10L 220V – 240V / 1ph

220V – 240V / 1ph / 7A 50/60Hz Available

8% Methane <1 ppm Ethane <1ppm N-Butane <2000 ppm Propane <250ppm Isopentane <2 ppm Water <3 ppm CO+CO2 <5ppm Oxygen <5 ppm Nitrogen <10 ppm Sulfur Non-Detected

We recommend Activated Alumina as the bottom layer of your filtration stack to absorb moisture at 30-50g per lb

This End Cap comes with Four 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid

residential places

Huber SynOil M10.120.08, Heat transfer fluid -10 to 120°C Size:10L 220V – 240V / 1phHuber SynOil M10. 120. 08, Heat transfer fluid 10 to 120C SynOil is a low viscosity Poly alpha olefin based fluid with a strongly enhanced low temperature characteristic. SynOil has excellent thermal stability as well as a very low tendency to evaporate. The fluid has a high viscosity index, which enables the product to flow, even at low temperatures, and not to build a disruptive film at high temperatures. Safety Data Sheet Advantages: High thermal